Ford Owner Help Ā· Keys & Keypad
How to Find Your Ford Factory Keypad Code
Have both keys? Turn each one to ON and the code shows on your dash. Other options below.
Already have it? ā set a personal code
Pick a Method
The two-key method is fastest. The others work with one key or none.
- Insert the first key and turn it to ON for about 4 seconds, without starting the engine.
- Turn it OFF and remove it.
- Insert the second key and turn it to ON. The factory code shows in the instrument cluster for a few seconds. It may appear after other warning messages.
This is the keyed-ignition method. Push-button Fords can differ, so check your Owner's Manual under Keyless Entry Keypad.
- Find the keyless entry module. On many F-150s it sits behind the passenger kick panel. On some Explorers it is behind cargo-area trim.
- Remove the trim panel carefully with a plastic trim tool.
- Read the code on the white label. Use the first five digits.
- Bring your registration and a valid photo ID to our Keyport service department.
- We pull the code with a scan tool. Ford releases it in person only, for security.
- We can set a personal code for you while you are here.
What the Factory Code Is
The driver-door keypad (Ford calls it SecuriCode) unlocks the vehicle with a five-digit code. Every Ford with one ships with a permanent factory code stored in the body module. You can add up to five personal codes that are easier to remember, and erase them any time, but only with the factory code. Some newer models dropped the factory keypad or offer it as an accessory.
| Source | What you need |
|---|---|
| Wallet card | The original owner's manual packet |
| Instrument cluster | Two programmed keys (keyed ignition) |
| Module label | Trim removal: kick panel or cargo area |
| Ford dealer | Registration and photo ID |
When It's a Shop Job
Code rejected, keypad dead, or down to one key? We retrieve codes, program keypads, and cut and program keys in-house, backed by our 3-Hour Diagnosis Guarantee, with free pickup and delivery within 20 miles of Keyport.
Factory Keypad Code: FAQs
Can the Ford factory keypad code be changed?
No. It is permanently stored in the vehicle. You can add up to five personal codes and erase them any time.
Where is my Ford keyless entry code stored?
In the body module. It is also printed on the wallet card and on the keyless entry module label, and many Fords can show it in the cluster using two programmed keys.
Can I look up my factory code by VIN myself?
No. A Ford dealer can retrieve it with a scan tool and proof of ownership. Online VIN code generators are not an official Ford source.
What if I only have one key?
The two-key method needs both keys. With one key, read the module label or have a Ford dealer retrieve the code.
How many digits is a Ford keypad code?
Five.
Can I add codes for family members?
Yes, up to five personal codes.
Does replacing my fob battery erase my door codes?
No. Door codes are stored in the vehicle, not the fob.
Will the dealer charge to retrieve my code?
There may be a small charge. Ford releases the code in person only, so bring your registration and a valid photo ID.
The information on this page is provided as a general guide for Ford owners, for convenience only. Procedures, locations, and specifications vary by model, year, and trim and may change over time. Always follow your vehicle's Owner's Manual, which takes precedence over anything on this page. These steps are not a substitute for professional service, and some can risk personal injury or vehicle damage if done incorrectly ā proceed at your own risk, and contact a qualified technician if you are unsure. Tom's Ford assumes no liability for any loss, injury, or damage arising from use of this information.